Skip to content

Free max-buy calculator for watch dealers — no signup needed. Open it

TUDOR · Pelagos and Pelagos

TUDOR M25600TN-0001 vs TUDOR M25610TNL-0001

5 published specifications differ between these two, and 9 are identical. Every figure below is what the manufacturer states for that reference; nothing is inferred from the other watch.

What differs

Specification
Case42mm titanium and steel case with satin finish42mm titanium and steel case with satin finish, numbered steel case back
BezelUnidirectional rotatable bezel in titanium, graduated over 60 minutes with ceramic matt black disc and graduations with white luminescent materialTitanium unidirectional rotatable 60-minute graduated bezel with ceramic matt black disc and graduations with beige luminescent coating
DialBlack with white index, date at 3 o'clockBlack, date at 3 o'clock with even numbered days displayed in red and odd numbered days in black
CrownTitanium winding crown with TUDOR logo in relief; helium escape valve at 9 o'clockTitanium screw-down winding crown at 9 o'clock with the TUDOR logo in relief; automatic helium escape valve at 3 o'clock
CalibreManufacture Calibre MT5612Manufacture Calibre MT5612-LHD

What is identical

Worth knowing as much as the differences: these are the specifications you cannot use to tell the two apart.

Diameter
42 mm
Water resistance
Waterproof to 500m (1,640 ft)
Crystal
Sapphire crystal
Bracelet
Titanium bracelet
Clasp
Folding clasp and safety catch in steel, with a bracelet extension system developed and patented by TUDOR
Movement
Self-winding mechanical movement with bidirectional rotor system
Power reserve
Approximately 70 hours
Certification
COSC
Movement notes
TUDOR states a five-year transferable guarantee with no registration or periodic maintenance checks required.

Stated for one, not the other

These rows cannot be compared, because one maker publishes the figure and the other does not. An empty cell is a gap in the manufacturer's documentation, not a gap in the watch — and not a licence to fill it in from the other column.

Case backnot statedNumbered steel case back

What the differences cost you

Each note below follows from the published figures in the tables above — what they mean for intake, for a listing, and for the handover. Nothing here estimates a price or a margin.

Different movements to verify and to service

The M25600TN-0001 runs the Manufacture Calibre MT5612 and the M25610TNL-0001 the Manufacture Calibre MT5612-LHD. Two consequences at intake: the service history that is normal for one calibre is not evidence about the other, and the calibre is the check that catches a movement swapped into the wrong case. Confirm the movement matches the reference rather than assuming it from the dial.

What to check on each

M25600TN-0001

  • Describe the case as titanium and steel, which is what TUDOR publishes, rather than as all titanium. The clasp is specified in steel as well and the weight in hand reflects the mixture.
  • Find the helium escape valve at 9 o'clock and confirm it is present and undamaged, since it is a functional valve rather than a decoration.
  • Work the patented bracelet extension through its travel. It is an automatic spring mechanism, it sits inside the clasp, and a failed one is not obvious until the bracelet will not hold length.

M25610TNL-0001

  • Confirm the crown is at 9 o'clock and the helium escape valve at 3. On this reference the two are reversed relative to the standard Pelagos, and a watch with them the usual way round is a different reference.
  • Photograph the number engraved on the steel case back and record it, because a numbered back is part of what a buyer is acquiring.
  • Check the date alternates red for even days and black for odd ones across a full change, which is specified behaviour rather than a fault.

Sources

Not affiliated with TUDOR. Specifications are read from each manufacturer's own published documentation on the dates shown and may change; the manufacturer's current documentation governs.