Skip to content

Free max-buy calculator for watch dealers — no signup needed. Open it

Rolex against TUDOR

Rolex 126710GRNR vs TUDOR M79830RB-0001

13 published specifications differ between these two, and 1 are identical. Every figure below is what the manufacturer states for that reference; nothing is inferred from the other watch.

What differs

Specification
CaseOyster, 40 mm, Oystersteel. Monobloc middle case, screw-down case back and winding crown41mm steel case with polished and satin finish
Diameter40 mm41 mm
Water resistanceWaterproof to 100 metres / 330 feetWaterproof to 200m (660 ft)
CrystalScratch-resistant sapphireDomed sapphire crystal
BezelBidirectional rotatable 24-hour graduated bezel, two-colour grey and black Cerachrom insert in ceramic, moulded numerals and graduationsBidirectional rotatable 48-notch bezel in steel with a 24-hour graduated anodised aluminium disc in matt burgundy and blue
DialBlack, with highly legible Chromalight display with long-lasting blue luminescenceBlack, domed
CrownScrew-down, Triplock triple waterproofness systemSteel screw-down winding crown with the TUDOR rose in relief, with circular satin-brushed steel winding crown tube
BraceletJubilee, five-piece links, OystersteelRiveted steel bracelet with polished and satin finish
ClaspFolding Oysterlock safety clasp with Easylink 5 mm comfort extension linkFolding clasp with safety catch
CalibreCalibre 3285, Manufacture RolexManufacture Calibre MT5652
MovementPerpetual, mechanical, self-winding, GMT function; bidirectional self-winding via Perpetual rotorSelf-winding mechanical movement with bidirectional rotor system, built-in architecture
CertificationSuperlative Chronometer (official chronometer certification + Rolex certification after casing)COSC
Movement notesPrecision −2/+2 sec/day after casing. Second time zone with independent rapid-setting of the hour hand, 24-hour display, instantaneous date, stop-seconds.TUDOR states a five-year transferable guarantee with no registration or periodic maintenance checks required.

What is identical

Worth knowing as much as the differences: these are the specifications you cannot use to tell the two apart.

Power reserve
Approximately 70 hours

Stated for one, not the other

These rows cannot be compared, because one maker publishes the figure and the other does not. An empty cell is a gap in the manufacturer's documentation, not a gap in the watch — and not a licence to fill it in from the other column.

Case backScrew-downnot stated

What the differences cost you

Each note below follows from the published figures in the tables above — what they mean for intake, for a listing, and for the handover. Nothing here estimates a price or a margin.

Do not describe these the same way

200 metres on the M79830RB-0001 against 100 on the 126710GRNR. Both are more than daily life asks for, so the number is a listing-accuracy question rather than a practical one: quote each watch its own figure, and remember that neither rating survives an unserviced case by itself.

Different movements to verify and to service

The 126710GRNR runs the Calibre 3285, Manufacture Rolex and the M79830RB-0001 the Manufacture Calibre MT5652. Two consequences at intake: the service history that is normal for one calibre is not evidence about the other, and the calibre is the check that catches a movement swapped into the wrong case. Confirm the movement matches the reference rather than assuming it from the dial.

What to check on each

126710GRNR

  • Set the local hour hand forward and back in one-hour jumps and confirm it moves alone. The 24-hour hand and the minutes must stay put — that independence is the whole complication.
  • Check where the two bezel colours meet. A two-colour Cerachrom insert has a defined transition, and it should sit precisely on the graduation rather than drifting to one side.
  • Look along the Jubilee bracelet for stretch. Five-piece links mean many more pins than an Oyster bracelet of the same length, and Jubilees show their age in the hand before they show it in photographs.

M79830RB-0001

  • Grade the bezel disc as anodised aluminium. It fades and dents rather than chipping, so a paler burgundy on a used example is ageing rather than damage.
  • Count the bezel through a full revolution against the specified 48 notches and confirm it turns freely both ways, which is correct for a timezone bezel.
  • Check the crown tube is the circular satin-brushed steel type specified, since TUDOR calls the tube out separately on this reference.

Sources

Not affiliated with Rolex or TUDOR. Specifications are read from each manufacturer's own published documentation on the dates shown and may change; the manufacturer's current documentation governs.