Skip to content

Free max-buy calculator for watch dealers — no signup needed. Open it

OMEGA · Seamaster Aqua Terra 150M and Seamaster Aqua Terra 150M

OMEGA 220.10.41.21.01.002 vs OMEGA 220.92.43.22.99.001

11 published specifications differ between these two, and 3 are identical. Every figure below is what the manufacturer states for that reference; nothing is inferred from the other watch.

What differs

Specification
CaseSteel, 41 mmTitanium, 43 mm
Diameter41 mm43 mm
Thickness13.4 mm14.12 mm
Lug to lug48 mm50 mm
Lug width20 mm21 mm
DialBlackGrey
BraceletSteelBlack rubber strap
ClaspFoldover butterfly clasp with comfort settingFoldover clasp in titanium
CalibreCalibre OMEGA 8900Omega 8938
MovementSelf-winding movement with Co-Axial escapement, automatic winding in both directionsSelf winding
Movement notesResistant to magnetic fields reaching 15,000 gauss. Free sprung-balance with silicon balance spring, two barrels mounted in series, and a time zone function. Rhodium-plated rotor and bridges with Geneva waves. Total product weight approximately 148 g.Listed by OMEGA as a Master Chronometer certified watch. Total product weight approximately 94 g.

What is identical

Worth knowing as much as the differences: these are the specifications you cannot use to tell the two apart.

Water resistance
15 bar (150 metres / 500 feet)
Crystal
Domed scratch-resistant sapphire crystal with anti-reflective treatment on both sides
Power reserve
60 hours

Stated for one, not the other

These rows cannot be compared, because one maker publishes the figure and the other does not. An empty cell is a gap in the manufacturer's documentation, not a gap in the watch — and not a licence to fill it in from the other column.

CertificationMaster Chronometer, approved by METASnot stated

What the differences cost you

Each note below follows from the published figures in the tables above — what they mean for intake, for a listing, and for the handover. Nothing here estimates a price or a margin.

One of these is the harder fit

Lug to lug is 50 mm on the 220.92.43.22.99.001 against 48 mm on the 220.10.41.21.01.002 — a 2 mm difference across the wrist. Diameter is what buyers ask about; lug to lug is what decides whether a case sits flat or overhangs. Ask for a wrist measurement before shipping the 220.92.43.22.99.001, and put the figure in the listing rather than the diameter alone.

These reach different buyers

43 mm on the 220.92.43.22.99.001 against 41 mm on the 220.10.41.21.01.002. Diameter is a poor predictor of how a watch actually sits, but it is the field buyers filter on, so the two land in front of different people. Do not let one listing's photographs or copy stand in for the other.

Different case materials, different handling

The 220.10.41.21.01.002 is steel and the 220.92.43.22.99.001 is titanium. Different case materials mark, polish and refinish differently, so the condition language that fits one will mislead on the other. Photograph and describe each on its own terms.

Different movements to verify and to service

The 220.10.41.21.01.002 runs the Calibre OMEGA 8900 and the 220.92.43.22.99.001 the Omega 8938. Two consequences at intake: the service history that is normal for one calibre is not evidence about the other, and the calibre is the check that catches a movement swapped into the wrong case. Confirm the movement matches the reference rather than assuming it from the dial.

What to check on each

220.10.41.21.01.002

  • Test the time zone function properly: the hour hand should jump independently in one-hour steps without disturbing the minutes or seconds. A hand that drags the minute hand with it is a fault, not a quirk.
  • Check the anti-reflective coating on both crystal surfaces. OMEGA specifies treatment on both sides, and worn or patchy coating on the inner face cannot be polished away — it needs a new crystal.
  • Wind and run it for a full day to confirm the 60-hour reserve behaves. Twin barrels in series should deliver consistent amplitude rather than fading early.

220.92.43.22.99.001

  • Lift it before you judge the size. Ninety-four grams on a 43 mm case is extraordinary, and weight changes how a large watch is received more than diameter does.
  • Assess the titanium against titanium rather than against steel. It marks greyer and shallower, so an honestly kept titanium case can read worse under a raking light than a steel one in the same condition.
  • Check the titanium clasp specifically. OMEGA specifies the buckle material separately here, and titanium hardware is not interchangeable with a steel donor.

Sources

Not affiliated with OMEGA. Specifications are read from each manufacturer's own published documentation on the dates shown and may change; the manufacturer's current documentation governs.